免费精品综合导航👅_大黑鸡穴视频_.手.动.输.入.网.址.联.系.客.服.人.员.lanan_shell
To view this page ensure that Adobe Flash Player version 9.0.124 or greater is installed.
Flight Operations Briefing Notes Approach Techniques Flying Stabilized Approaches I Introduction Rushed and unstabilized approaches are the largest contributory factor in CFIT and other approach-and-landing accidents. Rushed approaches result in insufficient time for the flight crew to correctly:
. Execute a safe approach.
This Flight Operations Briefing Note provides an overview and discussion of:
. Criteria defining a stabilized approach; and,
. Factors involved in rushed and unstabilized approaches.
Note: Flying stabilized approaches complying with the stabilization criteria and approach gates defined hereafter, does not preclude flying a Delayed Flaps Approach (also called a Decelerated Approach) as dictated by ATC requirements.
II Statistical Data (Source: Flight Safety Foundation Flight Safety Digest Volume 17 & 18 – November 1998 / February 1999). Continuing an unstabilized approach is a causal factor in 40 % of all approach-and-landing accidents. In 75% of the off-runway touchdown, tail strike or runway excursion/overrun accidents, the major cause was an unstable approach. Table 1 shows the factors involved in rushed and unstabilized approaches.
Factor % of Events High and/or fast approach or Low and/or slow approach 66 % Flight-handling difficulties : - Demanding ATC clearances - Adverse wind conditions 45 %
Table 1 Factors Involved in Unstabilized Approaches III Stabilization Heights The following minimum stabilization heights are recommended to achieve timely stabilized approaches:
Meteorological Conditions Height above Airfield Elevation IMC www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：Approach Techniques Flying Stabilized Approaches
