在线看免费❗_欧美人与人动人物2020免费网站-艺文笔记

王金豹 2026年01月23日 05:29:20
发布于:曼谷

在线看免费❗_欧美人与人动人物2020免费网站_.手.动.输.入.网.址.联.系.客.服.人.员.lanan_shell

__________  Subtask 24-24-34-860-052  A. Aircraft Maintenance Configuration  (1)  Make sure that the ground service network is energized  (Ref. TASK 24-42-00-861-001).

 (2)  Make sure that the warning notice is in the cockpit, on the EMER ELEC PWR section of the overhead panel 21VU, to tell persons not to operate the pushbutton switches.

 (3)  Make sure that the access platform is in position at the access doors 812 and 822 of the avionics compartment.

 (4) Make sure that the access doors 812 and 822 are open.  Subtask 24-24-34-865-051

 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged  -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION ------------------------------------------------------------------------------- R 105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01 R 106VU CSM/G /EV/MAN/SPLY 6XE B04 R  4. Procedure _________  (Ref. Fig. 401/TASK 24-24-34-991-001)  Subtask 24-24-34-420-050

 A. Installation of the GCU  (1)  Clean the component interface and/or the adjacent area.

 (2)  Do an inspection of the component interface and/or the adjacent area.

 (3)  Remove the blanking caps from the electrical connectors.

 (4)  Make sure that the electrical connectors are clean and in the correct condition.

 (5)  Put the CSM/G control unit (1) in position.

 (6)  Install the washers (2) and the screws (3) and then tighten the screws.

 (7) Connect the electrical connector (4).  Subtask 24-24-34-865-052

 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 6XE, 7XE Subtask 24-24-34-710-050

 C. Operational test  (1) Do an operational test of the emergency GCU, with the CFDS (Ref. TASK 24-24-00-710-002).  NOTE : As an alternative procedure, do this operational test without ____  the CFDS.

 (2) Do an operational test of the emergency GCU without the CFDS (Ref. TASK 24-24-00-710-001).  5. Close-up ________ Subtask 24-24-34-410-050  A. Close Access  (1)  Make sure that the work area is clean and clear of tool(s) and other items.

 (2)  Close the access doors 812 and 822.

 (3)  Remove the warning notice(s).

 (4) Remove the access platform(s). Subtask 24-24-34-860-051  B. Put the aircraft back to its initial configuration.  (1) De-energize the ground service network  (Ref. TASK 24-42-00-862-001).

 GENERATOR - CONSTANT SPEED MOTOR (CSM/G) (8XE) - REMOVAL/INSTALLATION _____________________________________________________________________ TASK 24-24-51-000-001 Removal of the Constant Speed Motor/Generator (CSM/G) (8XE) WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES. _______  WARNING : DO NOT WALK ON A CLOSED LANDING GEAR DOOR.

 1.  Reason for the Job

__________________  Self Explanatory

 2.  Job Set-up Information

______________________  A. Fixtures, Tools, Test and Support Equipment  -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION ------------------------------------------------------------------------------- No specific blanking caps No specific blanking plugs No specific circuit breaker(s) safety clip(s) No specific drainage container No specific warning notice No specific stepladder 2 m (6 ft. 7 in.)  B. Referenced Information  -------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------- 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized  Configuration before Maintenance Action 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 32-12-00-010-001 Open the Main Gear Doors for Access 24-24-51-991-001 Fig. 401  3. Job Set-up __________ Subtask 24-24-51-860-050  A. Aircraft Maintenance Configuration  (1) On the overhead panel 21VU, make sure that:  - the guarded pushbutton-switch EMER GEN TEST is released (the guard is closed),

 - the guarded pushbutton-switch MAN ON/AUTO is released (the guard is closed),

 1EFF : ALL 1 24-24-51Page 401 1 1 Feb 01/99R 1 1 1CES 1

 -the guarded pushbutton-switch RAT MAN ON 2805GE is released (the guard is closed).   www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:A320飞机维护手册 AMM ELECTRICAL POWER 电源2

原标题:
17 个人收藏 收藏

评论交流

这位访客请「登录」后参与评论

相关推荐

  • 征信业的未来在于合作与规范

      背靠河南国资与三大运营商等股东资源、华为原团队的技术资源,超聚变业务迅速恢复并进一步增长。
  • 李云泽:我国抵御风险的家底非常坚实

      伊万带队训练前的开场白时间不长,在简短的问候后,他特意让老队员站成两排,列队欢迎程进等4名国足新人(共有5名新人,谢文能正在打亚冠)。
  • 限制人脸识别,新界线在哪?

      在快递新规实施的背景下,快递柜撤柜现象引起了热议。3月1日,新修订的《快递市场管理办法》正式实施,其中明确,经营快递业务的企业未经用户同意擅自使用智能快件箱、快递服务站等方式投递快件的行为属于违规,情节严重的,将被处1万元以上3万元以下的罚款。
  • 宽松的货币政策只能是经济的“麻药”

      据记者不完全梳理,2014年《政府工作报告》首次提出“跨境电子商务”,并提出要扩大跨境电子商务试点;此后多年连续提出扩大试点,支持企业建设出口产品“海外仓”;2019年《政府工作报告》提到,关税总水平从9.8%降至7.5%,新设一批跨境电商综合试验区,改革完善跨境电商新业态扶持政策;2021年特别提到稳定加工贸易,发展跨境电商新业态新模式,支持企业开拓多元化市场;2023年的《政府工作报告》中提到,五年来,我国加大出口退税等政策支持力度,发展外贸新业态,新设152个跨境电商综试区,支持建设一批海外仓。
  • 这种农药对人类健康的影响,至少可持续三代

      更值得一提的是,路易威登Voyager飞行陀飞轮空窗珐琅腕表刻有著名“日内瓦印记”。日内瓦印记认证创立于1886年,代表腕表制作所需部件的最高制造工艺和加工水准。
  • 惨了!火箭这人死活卖不动 带首轮签都没人愿要

      通过儿子当家庭教师为突破口
  • 女排土耳其杯萨勒耶尔0

      教育部部长怀进鹏:将构建德智体美劳全面培养的教育体系。大力开展青少年学生读书行动;保障学生每天1小时体育锻炼和充足的课间活动,注重劳动习惯养成;采取务实管用举措,着力解决小眼镜、小胖墩和学生心理健康问题。
  • 贵金属连续上涨 走势与宏观基本面有所偏离

      根据平安中证A50ETF上市交易公告书,险资则同样占据多个席位。平安中证A50ETF的前四名持有人中,前四席均为“平安系”的保险公司,第六大基金份额持有人“平安基金中韩人寿1号单—资产管理计划”也认购了1000.12万份的平安中证50ETF,持有份额占比为0.5%。
  • 港珠澳大桥今日正式运营:打破海上桥梁工程极限

      RTXVideo的使用也极为简单:只需在NVIDIA控制面板的视频选项中,点击“使用NVIDIA设置”,再点击右方的“RTX视频增强”下的“超分辨率”选项框即可默认打开。目前RTXVideo暂不支持在本地播放器中对本地视频进行超采样,不过可以把视频文件拖进浏览器内播放。
  • 复盘豆瓣:在算法和社交中反复摇摆

      “后市看,当前过热交易下,多项技术指标出现超买或背离,短期贵金属已不宜追高。如此暴涨行情仍需得到周内重磅数据与事件的验证支持,我们预计接下来贵金属受多头回补引发的回调压力将加大。”南华期货有色分析师夏莹莹对澎湃新闻记者表示。
  • 兴业期货:贸易战缓和新季玉米上市 C1901看跌至1800

      Spirit在上个月赢得IEM卡托维兹冠军后,获得了电竞世界杯的第一个参赛席位。这支俄罗斯队伍的夺冠也为他们赢得了IEM科隆和BLASTPremier世界总决赛的席位。
  • 这些时尚感发饰也太上头了吧

      00后正在成为网络文学作家新增主力军。数据显示,2023年,阅文集团新增作家60%是00后。
  • 马斯克决定任命朱晓彤为特斯拉全球CEO

    楼盘规划占地面积70200㎡;建筑面积㎡;有16栋;总共838户;建筑类型包括小高层、洋房。