国内精品♨️_女生越喊疼男生越往里塞_.手.动.输.入.网.址.联.系.客.服.人.员.lanan_shell
/49 As soon as the system pb is released the E/WD returns and the light on the ECAM Control Panel is extinguished. EIS MENU Reconfiguration 29/49 When you are limited to a single ECAM screen the handling of system malfunctions and how you are advised of failures is slightly different. For clarity we will concentrate on the ECAM screen. If an advisory condition arises, the relevant system page is not automatically displayed. Instead the light on the pb switch for the system and a boxed ADV message on the E/WD will flash. EIS MENU Reconfiguration 30/49 If an ECAM warning or caution is triggered then there will be no automatic display of the relevant system page. System pages should be called by manual selection on the ECAM Control Panel. To see this more clearly let’s look at a failure. We will only discuss the one ECAM screen and the selections on the ECAM Control Panel. EIS MENU Reconfiguration 31/49 You hear a single chime and see the MASTER CAUTION light. Cancel the MASTER CAUTION EIS MENU Reconfiguration 32/49 No, to extinguish the Master Caution light, click on the Master Caution pb. EIS MENU Reconfiguration 33/49 No, to extinguish the Master Caution light, click on the Master Caution pb. EIS MENU Reconfiguration 34/49 TThheeMASTTER CAUTTIION iiss eexxttiinngguuiisshheedd EIS MENU Reconfiguration 35/49 When a failure is detected ECAM will give the normal aural and visual indications. On the E/WD the failure message will be displayed and on the ECAM Control Panel the two CLR keys will be illuminated. F/O ND SCREEN F/O PFD SCREEN EIS MENU Reconfiguration 36/49 By looking at the underlined system title you can see which system page needs to be viewed. In this example the FUEL page pb should be selected and held on the ECAM Control Panel. The system page can be studied to provide more information about the failure and then the pb released. EIS MENU Reconfiguration 37/49 The E/WD returns and the ECAM actions can be carried out. We will do these actions for you. EIS MENU Reconfiguration 38/49 EIS MENU Reconfiguration 39/49 Now that the ECAM actions have been completed there is only the failure title remaining. To confirm what effect the actions have had on the system reselect the FUEL page on the ECAM Control Panel. Call the FUEL page. EIS MENU Reconfiguration 40/49 As before the FUEL page is displayed while the pushbutton is depressed. You can see on the system page that the cross-feed is connected and the pump has shut down. EIS MENU Reconfiguration 41/49 As soon as the pushbutton is released the E/WD returns. EIS MENU Reconfiguration 42/49 To continue with ECAM a CLR key should be pressed to remove the failure message on the E/WD. Clear FUEL EIS MENU Reconfiguration 43/49 Normally the Status page would be displayed but with only a single ECAM screen available the STATUS page must be manually selected. Notice that there is a boxed STS symbol on the E/WD. EIS MENU Reconfiguration 44/49 The STATUS pushbutton should be held down and the STATUS page reviewed. The STATUS page can be displayed for up to 3 minutes before an automatic return to the E/WD occurs. EIS MENU Reconfiguration 45/49 EIS MENU Reconfiguration 46/49 Once the review is complete the pushbutton is released and the E/WD returns. EIS MENU Reconfiguration 47/49 The ECAM procedure is now complete. There are no lights on the ECAM Control Panel. EIS MENU Reconfiguration 48/49 During the approach phase there is no automatic call of the STATUS page when the Flap selector is moved. To remind the pilots to review STATUS the boxed STS symbol on the E/WD pulses. The STATUS page should be selected as before. EIS MENU Reconfiguration 49/49 In this module we have looked at various failures associated with the EIS. You will have the opportunity to practice the various failures during the simulator phase. MMoodduulleeCCoommpplleettee NEXT EIS MENU Reconfiguration 50/49 LLIISSTTOOFFSSUUBBJJEECCTTSS EXIT AUDIO GLOSSARY FCOM RETURN DDMMCC11FFAAUULLTT PPFFDDSSCCRREEEENNFFAAUULLTT UUPPPPEERREECCAAMMSSCCRREEEENNFFAAUULLTT BBOOTTHHEECCAAMMSSCCRREEEENNSSFFAAUULLTT ECAM MENU Abnormal Operation 1/38 ECAM MENU Abnormal Operation 2/38 AIRCRAFT SYSTEM SENSORS www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：空客a320飞机概述2
