国内精品♨️_兰桂坊十三_.手.动.输.入.网.址.联.系.客.服.人.员.lanan_shell
S 494-013-N00 (1) Install the PWA 85677 handling bracket on the front flange of the front fan case (24) at the 12:00 o'clock position.
(2) Attach the hoist to the handling bracket.
(3) Lightly put a load on the hoist to keep the fan case (24) on the same horizontal centerline as that of the engine.
(4) Remove the brackets (12, 14, 15, 20, 22, 46, and 47) from Flange B as follows:
(a) Remove the bolts (18), washers (19 and 23), spacers (17 and 21), and nuts (16) that attach the brackets (12, 14, 15, 20, 22, 46, and 47) to Flange B.
NOTE: Before you remove the brackets, put marks on the fan ____ case to make a record of each bracket's position and location. This will help you install them. (b) Remove all of the brackets (12, 14, 15, 20, 22, 46, and 47). S 034-017-N00 (5) Remove the remaining bolts (18), washers (19 and 23), spacers (17 and 21), and nuts (16) from the rear (Flange B) of the front fan case (24). EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-33-01 ALL ú ú N04 Page 411 ú Jun 10/93 BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. ////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL //////////////////////// S 034-018-N00 (6) Remove the front fan case (24) from the engine as follows:
(a) Lightly hit the flange with the fiber mallet to loosen the fan case (24).
(b) With the hoist, remove the front fan case (24) from the engine.
(c) Put the front fan case (24) on the pallet with the rear flange down.
(d) Remove the hoist and the handling bracket from the fan case.
S 034-019-N00 (7) If you will install a new fan case, do the steps that follow:
(a) Remove the two bolts (26) that attach the mounting pad (25) of the vibration accelerometer to flange A at approximately the
1:00 o'clock position. (b) Remove these brackets (10, 11, 32, 37, 38, 39, and 41) and the seven (27) brackets from Flange A1 as follows: NOTE: Put marks on the fan case for the bracket positions and ____ locations before you remove them. This will help you install them. 1) Remove the bolts (28), washers (5, 29, and 30), and nuts (31) that attach the seven brackets (27), and the brackets (32 and 38) to Flange A1. NOTE: These are at approximately the 11:30, 11:45, 12:00, ____ 1:00, 1:30, and 2:30 o'clock positions. a) Remove the bracket (32) and the seven (27) brackets from the front fan case (24). 2) Remove the bolts (33), washers (34), and nuts (35) that attach the brackets (10, 39, and 41) to Flange A1. NOTE: These are at approximately the 1:30, 2:00, and 3:00 ____ o'clock positions.
a) Remove the brackets (10, 39, and 41) from the fan case (24). NOTE: Bracket (41) includes the tee and the ____ flex hose (40) attachment. 3) Remove the bolts (36), washers (5 and 29), and nuts (31) that attach the brackets (11, 37, and 38) to Flange A1 at approximately the 1:45 and 2:00 o'clock positions. a) Remove the brackets (11, 37, and 38) from the front fan case (24). EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-33-01 ALL ú ú N03 Page 412 ú Feb 15/99 BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. TASK 72-33-01-404-020-N00 3. Install the Front Fan Case __________________________ A. Special Tools and Equipment (1) PWA 85667 - Handling Bracket, Pratt & Whitney, Commercial Products Division, 400 Main Street, East Hartford, CT 06108
B. Standard Tools and Equipment
(1) Hoist - Code 2504, 1 ton capacity, 28 foot lift, standard hand chain with safty hooks, C & M Hoist Division Columbus McKinnon Corp., Tonawanda, NY 14150, or equivalent
(2) M303, M305, or M307 Gergen Mechanical Crimper Bergen Cable Technologies Inc www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：747-400 AMM 飞机维护手册 发动机 ENGINE 2
