国产自拍👅_鬼斧下卷-艺文笔记

王金豹 2025年11月14日 11:12:49
发布于:曼谷

国产自拍👅_鬼斧下卷_.手.动.输.入.网.址.联.系.客.服.人.员.lanan_shell

__________  Subtask 24-24-34-860-052  A. Aircraft Maintenance Configuration  (1)  Make sure that the ground service network is energized  (Ref. TASK 24-42-00-861-001).

 (2)  Make sure that the warning notice is in the cockpit, on the EMER ELEC PWR section of the overhead panel 21VU, to tell persons not to operate the pushbutton switches.

 (3)  Make sure that the access platform is in position at the access doors 812 and 822 of the avionics compartment.

 (4) Make sure that the access doors 812 and 822 are open.  Subtask 24-24-34-865-051

 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged  -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION ------------------------------------------------------------------------------- R 105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01 R 106VU CSM/G /EV/MAN/SPLY 6XE B04 R  4. Procedure _________  (Ref. Fig. 401/TASK 24-24-34-991-001)  Subtask 24-24-34-420-050

 A. Installation of the GCU  (1)  Clean the component interface and/or the adjacent area.

 (2)  Do an inspection of the component interface and/or the adjacent area.

 (3)  Remove the blanking caps from the electrical connectors.

 (4)  Make sure that the electrical connectors are clean and in the correct condition.

 (5)  Put the CSM/G control unit (1) in position.

 (6)  Install the washers (2) and the screws (3) and then tighten the screws.

 (7) Connect the electrical connector (4).  Subtask 24-24-34-865-052

 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 6XE, 7XE Subtask 24-24-34-710-050

 C. Operational test  (1) Do an operational test of the emergency GCU, with the CFDS (Ref. TASK 24-24-00-710-002).  NOTE : As an alternative procedure, do this operational test without ____  the CFDS.

 (2) Do an operational test of the emergency GCU without the CFDS (Ref. TASK 24-24-00-710-001).  5. Close-up ________ Subtask 24-24-34-410-050  A. Close Access  (1)  Make sure that the work area is clean and clear of tool(s) and other items.

 (2)  Close the access doors 812 and 822.

 (3)  Remove the warning notice(s).

 (4) Remove the access platform(s). Subtask 24-24-34-860-051  B. Put the aircraft back to its initial configuration.  (1) De-energize the ground service network  (Ref. TASK 24-42-00-862-001).

 GENERATOR - CONSTANT SPEED MOTOR (CSM/G) (8XE) - REMOVAL/INSTALLATION _____________________________________________________________________ TASK 24-24-51-000-001 Removal of the Constant Speed Motor/Generator (CSM/G) (8XE) WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES. _______  WARNING : DO NOT WALK ON A CLOSED LANDING GEAR DOOR.

 1.  Reason for the Job

__________________  Self Explanatory

 2.  Job Set-up Information

______________________  A. Fixtures, Tools, Test and Support Equipment  -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION ------------------------------------------------------------------------------- No specific blanking caps No specific blanking plugs No specific circuit breaker(s) safety clip(s) No specific drainage container No specific warning notice No specific stepladder 2 m (6 ft. 7 in.)  B. Referenced Information  -------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------- 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized  Configuration before Maintenance Action 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 32-12-00-010-001 Open the Main Gear Doors for Access 24-24-51-991-001 Fig. 401  3. Job Set-up __________ Subtask 24-24-51-860-050  A. Aircraft Maintenance Configuration  (1) On the overhead panel 21VU, make sure that:  - the guarded pushbutton-switch EMER GEN TEST is released (the guard is closed),

 - the guarded pushbutton-switch MAN ON/AUTO is released (the guard is closed),

 1EFF : ALL 1 24-24-51Page 401 1 1 Feb 01/99R 1 1 1CES 1

 -the guarded pushbutton-switch RAT MAN ON 2805GE is released (the guard is closed).   www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:A320飞机维护手册 AMM ELECTRICAL POWER 电源2

原标题:
20 个人收藏 收藏

评论交流

这位访客请「登录」后参与评论

相关推荐

  • 前瞻美国2月CPI:1月加速并非意外?能源或成搅局者

      而黄宗泽从《我的野蛮奶奶》搭胡杏儿、《潜行狙击》搭徐子珊、《法证先锋5》搭王敏奕,再到最近的《新闻女郎》中客串和佘诗曼同框,他的CP史几乎等同于TVB近二十年来的演变史。(黄宗泽客串几十秒,其他男演员二十集白干▲)
  • 多家大行、股份行年末收大额罚单 总金额超3亿元

      任怡嘉从鉴湖·蓝湾高尔夫球会后九洞开球,她在16号洞,110码,三杆洞,打出一杆进洞,获得奖品是:蓝湾绿城威斯汀度假酒店幻彩海景套房五晚。
  • 2018年梅花金银狗纪念币价格(2018年11月05日)

      (4)设计、施工交付、服务,始终是家装的核心竞争力,谁有优势,谁赢得未来。
  • 孩子为什么爱打人? 背后的原因竟让你心疼……

      根据目前蔚来放出的消息来看,阿尔卑斯将搭载800V快充架构,采用NT3.0平台,使用更小的电池组和内部开发的电动机。智能驾驶上采用只配备4D毫米波雷达(无激光雷达),以及1个ORINX芯片(目前型号4个),成本上肯定会更节省。按李斌的说法就是,将是“可换电的ModelY”,成本比特斯拉便宜10%左右,所以“定价能够给到一个很好的空间”。
  • 4岁孩子写字会不会太早?

      摘要:家装行业全面解析!
  • 华准检测公司开启云南电梯安全新篇章

      济南市市场监管局相关工作人员表示,“目前,黄金市场上确实存在两种销售方式,一种是按件出售,一种是按克售卖。按件出售的产品,商家以‘一口价’的方式进行明码标价并无不当。但如果价格偏高,会由国家发展和改革委员会相关部门进行价格指导。”同时,市场监管局提醒告诫黄金珠宝经营者,应依法依规诚信经营,经营者要规范员工的销售行为,严禁在销售中利用话术等误导消费者,销售中要尽到告知义务,要讲明称重量的足金和一口价金饰的区别,让消费者明明白白消费。
  • 汪涛:房地产调控不会全面收紧

      综合而言,国寿嘉园·天津乐境位于天津空港经济区,交通位置便利,设施安全完善,服务优质专业。社区从个人-家庭-邻里-社区-社会打造“五层交往空间”,相关配套、活动及服务较为齐全,可以满足不同阶段长者需求。特别是,整体建筑与室内设计和谐统一、柔和明快,长者生活区楼层较低且房间均在阳面,将长者的生活舒适度与安全性放在第一位,将专业化、精细化持续照料打造为自己的鲜明特色。
  • 多重利好傍身,黄金牛市准备就绪

      上周,外媒曝光了两项与AppleVisionPro注册流程相关的专利,该专利旨在为FaceTime通话创建逼真的用户虚拟化身。近日,美国专利商标局公布了苹果公司的一项专利申请,该申请延续了这一过程的细节,更重要的是,揭示了用户如何能够通过AppleWatch背面的传感器/摄像头捕获面部和手部的图像并将其注册到AppleWatch中。
  • 银行理财遇亏损,卖者应尽何责?买者该负何责?

      他在苹果营销部门30年的工作经验,对于一家以广告闻名的公司来说也是一大优势。不过,考虑他的潜在任期时,库克离职时他66岁的年龄确实让他处在了一个不上不下的位置。
  • 任泽平:银行业监管进入重点整顿新阶段

      (一)股东大会届次:2024年第二次临时股东大会
  • 利多难觅 油脂延续跌势

      要启用此功能,用户需要在“设置”——“隐私”——“设备权限”中启用“共享点云数据”。
  • 虚云:近代禅宗泰斗(图)

      5.曹一,565位(-8,↓)