国内精品♨️_亚洲人妻激情网_.手.动.输.入.网.址.联.系.客.服.人.员.lanan_shell
On the portable data loader: - the MDDU READY indication is shown.
- the power-up test of the FMGC 1 starts.
-at the end of this test, the triple click aural warning sounds. On the portable data loader: -the TRANS IN PROG indication is shown -then, the WAIT RESPONSE indication is shown when the transfer is completed. On the portable data loader: - the MDDU READY indication is shown.
- the power-up test of the FMGC 2 starts.
-at the end of this test, the triple click aural warning sounds.
-------------------------------------------------------------------------------ACTION RESULT ------------------------------------------------------------------------------- R 15. On the portable data loader: On the portable data loader: R - put the FM BITE DOWNLOAD TOOL - the TRANS IN PROG indication is shown R (PS4084544-103) into the disk - then, the WAIT RESPONSE indication is R drive. shown when the transfer is completed. R 16. On the portable data loader: R - eject the floppy disk. R - set the ON/OFF switch to OFF. R 17. Open the circuit breakers 10CA2 R and 11CA2. R 18. On the panel 52VU: R - disconnect the connecting R cable from the SYST2 R connector. R - install the FMS LOAD blanking R plate. R 19. Close the circuit breakers R 10CA1, 10CA2, 11CA1, 11CA2 and R wait 1 minute. R 5. Close-up________ R Subtask 22-70-00-865-099
R A. Remove the safety clip(s) and the tag(s) and close this(these) circuit R breaker(s): R ------------------------------------------------------------------------------- R PANEL DESIGNATION IDENT. LOCATION R ------------------------------------------------------------------------------- R 121VU COM NAV/ACARS/MU 2RB L06 R Subtask 22-70-00-862-068 R B. De-energize the aircraft electrical circuits R (Ref. TASK 24-41-00-862-002).
R **ON A/C 001-049, 051-061, 101-105, TASK 22-70-00-610-008 Upload the FM Data WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE _______ YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. Reason for the Job __________________ Upload the FM DATA with the Portable Data Loader (PDL) or with a floppy-disk data loader (SUNDSTRAND/ALLIED SIGNAL or equivalent). 2. Job Set-up Information ______________________ A. Fixtures, Tools, Test and Support Equipment -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION ------------------------------------------------------------------------------- No specific circuit breaker(s) safety clip(s) 964-0400-0XX 1 FLIGHT MANAGEMENT SYSTEM LOAD
B. Referenced Information -------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------- R 22-70-00-610-009 Crossload the FM Data 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
3. Job Set-up __________ Subtask 22-70-00-861-069 A. Aircraft Maintenance Configuration (1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002). (2) Make sure that the aircraft is in the ground configuration. Subtask 22-70-00-865-109
B. Make sure that this(these) circuit breaker(s) is(are) closed: -------------------------------------------------------------------------------
PANEL ------ DESIGNATION ------------------------------------------------------- IDENT. LOCATION------------------ 49VU AUTO FLT/FMGC/1 10CA1 B02 49VU AUTO FLT/MCDU/1 11CA1 B01 121VU AUTO FLT/FMGC/2 10CA2 M17 121VU AUTO FLT/MCDU/2 11CA2 N20 Subtask 22-70-00-865-110 C. Open, safety and tag this(these) circuit breaker(s): ------PANEL -------------------------------------------------------DESIGNATION ------------------IDENT. LOCATION
-------------------------------------------------------------------------------121VU COM NAV/ACARS/MU 2RB L06 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM AUTO FLIGHT 自动飞行3
